Foodhub for Business is now Touch2Success.

touch2success

Switching from paper tickets to a KDS: a one-week training and go-live plan

Train a kitchen team on a KDS in one week: set the screens up before anyone sees them, teach five actions (read the colour, tick an item, complete, hold, recall), run a dry service with practice orders, go live on a quiet shift with a printer still running, then review after the first busy night. The basics are only five actions, so the teaching itself is short.

By the Touch2Success KDS team · Published · 11 min read

Key points

  • Five actions cover almost every moment of service: read the colour, tick an item, complete the order, hold it, recall it.
  • Go live on a quiet shift, not a Friday. Give the team one or two ordinary services before the first rush.
  • Keep a printer running for week one. Paper alongside the screen costs a few rolls and removes most of the fear.
  • Lock the settings and save a template. A PIN stops well-meant tinkering, and a template sets up the next screen in seconds.

Written by the Touch2Success KDS team. We make a kitchen display system, so read this as a vendor's view. Where we describe other products, we say where the information came from.

Why switching goes wrong, when it does

The software is rarely the problem. A kitchen that has run on paper for ten years has a hundred small habits built around the rail: where the ticket goes when the burger is down, who tears it, who spikes it. A screen replaces all of them at once. If nobody explains what the new habits are, people invent their own, and three cooks end up using one screen three different ways.

So the job is not to teach the screen. It is to agree, as a kitchen, what you do when a ticket appears, when an item is cooked and when the bag is sealed. The plan below takes about a week, and most of it happens outside service. If you are still deciding whether to switch, start with KDS vs kitchen printer.

Who to involve before go-live

PersonWhy they matterWhat to ask of them
Whoever runs the passThey will live on the screen and set the pace for everyone else.Help choose the layout and decide what completing an order means.
One cook from each stationThey know what their station needs to see, and what is noise.Check the ticket shows the right items at a size they can read from where they stand.
The packerMissing items are caught here or not at all.Decide when labels and receipts print, and try the packer screen.
Your most sceptical cookIf they are won over, the rest follow. If they are ignored, the rest follow that too.Ask what would make the screen worse than paper, then fix those things first.
The owner or managerSomeone has to hold the Settings PIN and make the calls.Own the set-up, the house rules and the review.

The five actions every cook must know

There is a lot a kitchen screen can do. A new cook needs five things on day one. These are the Touch2Success KDS versions. Other systems have their own versions of some of these, so check before you write your training.

ActionHow, on Touch2Success KDSWhat it replaces on paper
1. Read the colourA ticket's header starts green. It turns yellow when the order is running late and red when it is late.Reading the printed time on every slip.
2. Tick off an itemTap an item when it is done.A pen mark, or memory.
3. Complete the orderDouble-tap the ticket header, or press bump on the bump bar.Spiking the ticket.
4. Hold itTap the ticket header and choose Hold, for an order that is not ready to be cooked.Moving the slip to the end of the rail.
5. Recall itBumped too soon? Recall it straight away, or find it under Completed and tap Recall.Digging through the spike.

Everything else can wait for week two: notes, the Priority flag, moving tickets forward and back, printing from the ticket. Allergies cannot wait. Teach how an allergy order shows and what to do with it on day one, using the routine in allergy orders in a busy kitchen.

The one-week plan

WhenWhat happensWho
Day 1Mount the screens, connect them to the network, sign in and run the Setup Wizard. Connect printers and bump bars.Manager
Day 2Set the layout, text size, sounds and modifier colours with the pass and one cook per station. Turn on the Settings PIN. Save each screen as a template.Manager, pass, station cooks
Day 3Dry run before service: put practice orders through and let everyone try the five actions.Whole team, 20 minutes per shift
Day 4First live service, on your quietest shift, with a printer still printing every order.Whole team
Day 5 or 6First busy night. One person watches the screens and does nothing else for the first hour.Whole team, plus a floater
Day 7Fifteen-minute review. Change what annoyed people. Decide whether the paper can go.Manager, pass, the sceptic
Shift the days to suit your week. The order matters more than the dates: set up, dry run, quiet service, busy service, review.

Days 1 and 2: set it up before anyone sees it

First impressions stick. If the team's first look at the screen is a ticket in text too small to read, with a sound nobody can hear over the extraction, you have lost a week. Get these right in an empty kitchen.

  • Stand where the cook stands. Choose Small, Medium or Large text from the grill, not from in front of the screen. Pick Rail, Flow or Split, in Light or Dark, the same way. Quick Settings shows a live preview of each layout.
  • Set the sound. Choose the new order sound, how many times it repeats and the volume, with the extraction and the fryers running.
  • Decide how much each ticket shows. Simple shows just what the cooks need. Standard adds customer name, delivery partner, address and delivery notes. Start simple at the stations.
  • Set modifier colours. To begin with, words like no are red, less is yellow, extra is green and on side is grey. Add the words your own menu uses.
  • Pick the language. Touch2Success KDS runs in English, Spanish, French, Albanian, Chinese and Turkish, and you can set a second language for the kitchen.
  • Turn on the Settings PIN, so the layout stays the way you left it.
  • Save each screen as a template. The Setup Wizard on the next screen of that type offers to apply it.

The full walkthrough, from mounting to first order, is in how to set up a kitchen display system.

Day 3: the dry run

Put an order through before service and let the team try each action once. It takes a couple of minutes per person and saves a lot of questions on a Friday night. Run it like this.

  1. 1

    Send a few practice orders

    Ring them through the till or place them on your own website: one plain order, one with modifiers, one large one. Cancel or void them afterwards the way you normally would.

  2. 2

    Everyone does the five actions

    Each cook ticks an item, completes an order, holds one and recalls one. Hands on the screen or the bump bar, not watching someone else do it.

  3. 3

    Agree what completing means

    Does the cook bump when the food is boxed, or does the packer bump when the bag is sealed? Pick one. This single rule matters more than any setting, and it keeps your kitchen numbers honest later.

  4. 4

    Leave one order to go late

    Let the team watch a ticket turn yellow, then red. Once they have seen it, nobody needs the colours explained again.

  5. 5

    Write down what annoyed people

    Too small, too loud, wrong items on the fryer screen. Fix it that afternoon, before the first live service.

Going live: first service, then the first Friday

Day 4 is your first live service. Choose your quietest shift, then keep a printer running. Touch2Success KDS can print a receipt automatically when an order arrives, so for week one every order can exist on the screen and on paper. The team cooks from the screen. The paper sits on the rail as a fallback.

Keep the paper for now if

  • It is the team's first week on screens.
  • You have not yet had a busy service on the new set-up.
  • The food leaves with a receipt anyway.

Take the paper away when

  • Nobody has looked at the rail for two services.
  • The team reaches for the screen first when something is unclear.
  • You have decided what still needs to print: a receipt for the bag, or a label for every item.

Many kitchens never go fully paperless, and that is fine. The cooking moves to the screen, and one printer stays for whatever leaves with the food. For what to keep printing, see KDS vs kitchen printer.

Day 5 or 6: the first Friday

The first rush is where habits are set. Three things help.

  • Put one person on the screens. For the first hour, someone who knows the system does nothing but watch the tickets, answer questions and recall anything bumped by mistake.
  • Call the reds. When a ticket goes red, the pass says the order number out loud. The screen shows the problem. A voice gets it fixed.
  • Do not change settings mid-service. Note what is wrong and change it tomorrow. A layout that moves at 8pm is worse than a layout that is slightly off.

Common objections, and honest answers

What you will hearWhat is behind itWhat to do
"I can't read it from here."Often true.Change the text size, the layout or where the screen is mounted. Do it the same day.
"I liked having the ticket in my hand."Paper travels with the food. A screen does not.Keep a printer for the pass, or print a label for every item.
"My hands are covered in flour."Touchscreens and wet, gloved or greasy hands do not mix.Add a USB bump bar at that station. See what a bump bar is.
"It keeps disappearing before I've finished."Someone else is bumping the order, or the house rule is not clear.Agree who completes an order. Show everyone Recall.
"Now everyone can see I'm behind."A fear of being measured.Say plainly that the colours are for deciding what to cook next, not for judging people. Then keep to it.
"What if it goes down?"A fair question.Explain what happens if the internet drops: orders already on the screens stay put, the screens keep syncing over the shop's own network, and new online orders arrive once the connection is back. Keep the printer for week one.

After week one

Sit down for fifteen minutes with the pass and your sceptic. Ask three questions. What is still slower than paper? What is the screen catching that paper missed? What do we want it to do that it is not doing yet?

The third question is where the second wave of features comes in: Priority and Allergy flags, a Packer Mode screen that waits until every station is done, item labels, an assembly line. Add one at a time. You can see the full list on the Touch2Success KDS page, see how it fits takeaways and quick-service kitchens, and find demos, answers and guides in resources.

If your team speaks several languages, read running a multilingual kitchen before you write your training notes.

Questions people ask

How long does it take to train kitchen staff on a KDS?

+

There are only five actions to learn: read the colour, tick an item, complete the order, hold it and recall it. They can be taught in a short dry run before service. Allow about a week from first set-up to your first busy night on screens, with paper still printing as a fallback.

Should I go live on a busy night?

+

No. Start on your quietest shift so the team gets one or two ordinary services on the screen before the first rush. The first busy night should not be anyone's first time using it.

Should I keep the kitchen printer when I switch to a KDS?

+

For the first week, yes. Touch2Success KDS can print a receipt automatically when an order arrives, so paper can run alongside the screen as a safety net. After that, many kitchens keep one printer for the receipt or label that leaves with the food.

What if a cook bumps an order by mistake?

+

Recall it. On Touch2Success KDS you can recall a ticket straight away, or find it under Completed and tap Recall. Teach this before go-live, because it removes most of the fear of pressing the wrong thing.

How do I stop staff changing the KDS settings?

+

Turn on the settings PIN. On Touch2Success KDS, Settings sit behind a PIN, so the layout, stations and printers stay the way the manager set them.

Do I have to set up every screen from scratch?

+

No. On Touch2Success KDS you can save a screen as a template, and the Setup Wizard on the next screen of that type offers to apply it.

What do I do if the team prefers paper?

+

Find out what paper does for them that the screen does not, and fix that. It is usually text size, where the screen is mounted, greasy hands or wanting something to send out with the food. A bump bar and a label or receipt printer answer most of it.

Who wrote this

The Touch2Success KDS team

We build and support Touch2Success KDS, the kitchen display system for restaurants and takeaways that take orders with Touch2Success. Everything we say about our own product is on the Touch2Success KDS page. Spotted something out of date? Tell us and we'll fix it.

Planning the switch?

Let your team see it first.

Book a demo and we'll show you and your team Touch2Success KDS running on your own menu.

Book a demo