Key points
- To bump an order is to complete it. The ticket clears from the screen and the next one moves up. A bump bar is the keypad that does it.
- It exists because kitchens are messy. Wet, gloved and greasy hands do not work well on a touchscreen, and a screen on the wall cannot be touched at all.
- Not every station needs one. A packer with clean hands and a touchscreen in reach can do without.
- Check your KDS supports it before you buy. Support varies a lot between systems. Touch2Success KDS works with USB bump bars and lets you remap every key.
Written by the Touch2Success KDS team. We make a kitchen display system, so read this as a vendor's view. Where we describe other products, we say where the information came from.
What a bump bar is
A bump bar is a keyboard built for a kitchen. It is a narrow strip, usually with one or two rows of large keys, fixed below or beside a kitchen display screen. Each key does one job: move to the next order, hold a ticket, flag an allergy, print, or bump.
The name comes from the last of those. In kitchen talk, to bump an order is to mark it finished, so it drops off the screen and the next ticket takes its place. Before screens, the same moment was a cook spiking a paper ticket. If the wider vocabulary is new to you, the KDS glossary explains bump, recall, expo and the rest.
Why kitchens use them
A touchscreen is fine in a shop. In a kitchen it has three problems, and a bump bar helps with each.
- Hands. A cook on the fryer has oil on their fingers. A cook on raw prep is wearing gloves. Screens respond badly to both, and the glass ends up smeared.
- Reach. The best place for a screen is often high on the wall above the pass, where everyone can see it and nobody can touch it.
- Feel. A physical key can be found by touch, so a cook can glance at the screen to check the selected order and press with a knuckle.
A bump bar is also one small object to wipe down at the end of a shift, where a screen mounted high on a wall is easy to forget.
What the keys on a bump bar do
Bump bars differ in how many keys they have, and each KDS decides what a key can do. On Touch2Success KDS, these are the actions you can put on a key.
| What you want to do | Actions a key can carry on Touch2Success KDS |
|---|---|
| Choose an order | Select next order, select previous order, close order, or jump straight to ticket 1 to 10 |
| Move it in the queue | Move order to front, forward, backward or to end |
| Act on it | Complete or recall, hold or unhold, add a note, order details, mark as priority, mark as allergy, print ticket, call waiter |
Most stations only need a few: next, previous, bump, recall and perhaps hold. The rest are there for the pass, where someone is managing the whole board. Put the actions your station uses most under your fingers and leave the others alone.
Bump bar vs touchscreen
Neither is better everywhere. The right answer changes from one station to the next, and plenty of kitchens run both.
| Touchscreen | Bump bar | |
|---|---|---|
| Wet, gloved or greasy hands | Unreliable, and the screen gets dirty. | Works. Keys can be pressed with a knuckle. |
| Screen mounted high on a wall | Cannot be reached. | Works. The bar sits at hand height. |
| Ticking off a single item | Easy. Tap the item. | The keys act on the selected order. |
| Learning curve | None. Tap what you see. | A few minutes to learn which key does what. |
| Extra hardware | None, if the screen is already touch. | One bar per screen. |
On Touch2Success KDS you do not have to pick. A screen takes touch, a USB bump bar, or both at once. That lets a cook bump from the bar during service and still tap a single item when that is quicker. Choosing the screen itself is covered in the kitchen display screen guide.
Which stations need a bump bar?
Use a simple rule: add one at any station where hands are wet, gloved or greasy, and at any screen mounted out of reach.
You can skip the bump bar if
- The screen is a touchscreen within easy reach.
- The person using it has clean, dry hands, such as a packer by the bags.
- You run one small screen and tap it a few times an hour.
Add a bump bar when
- The station is a grill, fryer or raw prep area.
- The screen is a TV on the wall with no touch.
- Cooks are wiping their hands before every tap.
- The screen is smeared by the end of each shift.
As a starting point for Touch2Success KDS: a small takeaway with touchscreens can treat a bump bar as optional, a busy delivery kitchen usually wants one for the cooks, and a full line wants one per prep station. How those stations fit together is in kitchen stations, expo and routing.
How a bump bar connects and how to set one up
On Touch2Success KDS a bump bar connects over USB and works like a keyboard. There is nothing to pair and nothing to charge. Set-up happens in Settings, under Printers & Sections, then Bump Bar.
- 1
Plug it in
Connect the bump bar to the screen by USB. It appears under Connected devices.
- 2
Choose your bump bar
Pick the sticker printed on your bar. Touch2Success KDS knows the common layouts, from 8-key and 10-key bars to bars with a shift row, and loads the matching keys for you.
- 3
Check each key
Press the keys one by one and watch them appear under Recent button presses.
- 4
Change any key
Under Button mapping, tap a key and select the action you want. Reset to defaults puts everything back if you change your mind.
- 5
Run a test order
Before service, put one order through and bump it from the bar. Then recall it. Two minutes now saves questions on a Friday night.
Do all kitchen display systems support bump bars?
No, and the differences are large enough to check before you buy either the software or the bar. This is what each vendor's own public pages said when we checked on 17 November 2026. Where we could not find it stated, we say so, which is not the same as the product lacking it.
| System | Bump bar support |
|---|---|
| Touch2Success KDS | USB bump bars. Every key can be remapped. |
| Toast KDS | One supported bump bar model (source). |
| Square KDS | Not supported natively (source). |
| Fresh KDS | USB or Bluetooth bump bars (source). |
| Lightspeed KDS | Not stated on the public pages we checked. |
| Epos Now KDS | Not stated on the public pages we checked. |
If a bump bar matters to your kitchen, the side-by-side pages go further: Touch2Success KDS vs Square KDS and Touch2Success KDS vs Toast KDS.
Quick fixes when a bump bar does nothing
| What you see | What to do |
|---|---|
| The KDS says no external keyboard was found | Plug the bump bar in over USB again and check it appears under Connected devices. |
| A key does the wrong thing | Open Button mapping, tap the key and select the action you want. |
| Keys do not match the stickers | Go back to Choose your bump bar and pick the layout that matches the sticker printed on your bar. |
| The mapping is in a muddle | Use Reset to defaults and start again. |
Still stuck, or planning a kitchen from scratch? The Touch2Success hardware page shows our screens, and the team can talk you through bump bars and printers for your layout.
Questions people ask
What is a bump bar in a restaurant?
+
A bump bar is a rugged keypad fixed below or beside a kitchen display screen. Cooks press its keys to select, hold or complete orders instead of touching the screen, which helps when hands are wet, gloved or greasy.
What does it mean to bump an order?
+
To bump an order is to mark it complete. The ticket clears from the kitchen display screen and the next one moves up. On most systems a bumped order can be recalled if it was cleared too soon.
How does a bump bar connect to a KDS?
+
It depends on the system. On Touch2Success KDS a bump bar connects over USB and works like a keyboard, so there is nothing to pair and nothing to charge. You pick your bar's layout in Settings and the keys are mapped for you.
Do I need a bump bar if I have a touchscreen?
+
Not always. A touchscreen within reach of someone with clean hands works well on its own. Add a bump bar where hands are wet, gloved or greasy, or where the screen is mounted out of reach. Touch2Success KDS works with touch, a bump bar, or both.
Can I change what the keys on a bump bar do?
+
On Touch2Success KDS, yes. Every key can be mapped to an action such as select next order, hold, recall, mark as allergy, print ticket or complete. Reset to defaults restores the original layout.
Does every kitchen display system work with a bump bar?
+
No. Support varies. When we checked vendors' public pages on 17 November 2026, Square KDS had no native bump bar support, Toast supported one model and Fresh KDS supported USB or Bluetooth bars. Touch2Success KDS works with USB bump bars.
Sources
- Toast: Use a Bump Bar With Toast KDS. Checked 17 November 2026
- Square Community: Lack of Native Bump Bar Integration. Checked 17 November 2026
- Fresh KDS: bump bar support. Checked 17 November 2026
Who wrote this
The Touch2Success KDS team
We build and support Touch2Success KDS, the kitchen display system for restaurants and takeaways that take orders with Touch2Success. Everything we say about our own product is on the Touch2Success KDS page. Spotted something out of date? Tell us and we'll fix it.

Sam
Tom
