Foodhub for Business is now Touch2Success.

touch2success

Kitchen stations, expo screens and KDS routing: how to split a kitchen across screens

KDS routing sends each item on an order to the screen at the station that cooks it, so the grill sees burgers and the fryer sees chips. An expo screen shows every order in full, for whoever runs the pass. Most busy takeaways run an expo screen at the pass, a prep screen per station and a packer screen.

By the Touch2Success KDS team · Published · 9 min read

Key points

  • Routing decides which screen an item appears on. Each station reads only its own work, and nobody scans a full ticket for the two lines that are theirs.
  • Expo is the screen that sees everything. It belongs above the pass, or at the end of the line in a bigger kitchen.
  • A packer screen should wait. With Hide Until Done on Touch2Success KDS, the packer only sees an order once every station has finished it.
  • A screen per station. As soon as cooks work apart at different stations, each station should see only its own items.

Written by the Touch2Success KDS team. We make a kitchen display system, so read this as a vendor's view. Where we describe other products, we say where the information came from.

What KDS routing means

Routing is the rule that decides which screen each item on an order appears on. A burger, chips and a milkshake are one order to the customer and three jobs to the kitchen. With routing, the burger shows at the grill, the chips at the fryer and the whole order at the pass.

Paper kitchens route too, just badly. Either every station gets its own printer, or one ticket is torn into strips and handed along the line. Both work until Friday night, when a strip goes missing and the fryer never hears about the onion rings.

On Touch2Success KDS, stations use the kitchen sections from your store's menu set-up. On each screen you tick the sections that screen cooks, then turn on Only Show My Items to hide everything else. If your cooks prefer context, Show Full Order Details keeps the whole order on the ticket with other stations' items in italics.

What an expo screen is

Expo is short for expeditor: the person at the pass who checks each order is complete, chases the station that is behind and decides what goes out next. In a large restaurant that is a job. In a takeaway it is whoever is standing nearest the bags.

An expo screen is the screen built for that person. It shows every order in full instead of one station's slice of it. On Touch2Success KDS the screen type is simply called KDS: a view of all orders, so staff can manage, rush and clear finished orders for service. It is the right choice for the screen above the pass, and for the expo at the end of a line.

The four screen types, and the job each one does

Different products use different names. These are the four screen types on Touch2Success KDS. You pick one in the Setup Wizard and can change it at any time.

Screen typeWhat it showsWhere it goes
KDS (expo)Every order in full, so one person can manage, rush and clear them.Above the pass, or at the end of the line
Prep StationOnly the items assigned to that station. The grill sees burgers, the fryer sees chips.Grill, fryer, pizza oven
Packer ModeThe items from every prep station, brought together into one package. The packer marks the order Ready.By the bags
Batch CookingWhat to cook ahead, in batches instead of ticket by ticket, with a low-stock alert when the next batch is due.Wherever you cook ahead

Batch Cooking works differently from the other three, so it has its own guide: all-day counts and batch cooking.

How an order is routed, item by item

  1. 1

    The order lands

    A new order arrives from the till, your website or app, a kiosk or a delivery partner. It appears on the screens set to receive new orders, with a sound, and the timer starts.

  2. 2

    Each prep station sees its own items

    The grill screen shows the burgers. The fryer screen shows the chips and onion rings. Neither has to read past the other's work.

  3. 3

    Each station completes only its part

    On a line, each station completes only its own items, so bumping at the grill never clears the fryer's work.

  4. 4

    The ticket moves on

    If your screens are linked as an assembly line, a bumped ticket moves to the next station in the order you set.

  5. 5

    The packer brings it back together

    Packer Mode shows the items from every station as one order again. The packer checks it, bags it and marks it Ready.

The assembly line: receives from, send to

Stations decide what each screen shows. The assembly line decides the order the screens see a ticket in. On Touch2Success KDS each screen needs to know two things: where its tickets come from, and where they go next.

ScreenScreen typeReceives fromSend to
GrillPrep StationMain (new orders)Fryer
FryerPrep StationGrillPacker Mode
PackerPacker ModeEvery stationMarks the order Ready
An example three-screen line on Touch2Success KDS. Our team can help you plan the order of yours.
  • The first screen. Leave Receives From on Main (new orders). New orders arrive here.
  • The screens in between. Set Receives From to the station before, and Send to to the station after.
  • The last screen. Only the last screen marks the order ready.

Packer and expo settings worth switching on

The end of the line decides what the customer gets. These settings sit under Settings, Screen Type on Touch2Success KDS, and each one removes a small job from the person at the pass.

SettingWhat it does
Hide Until DoneThe packer screen only shows an order once every station has finished it, so nothing is bagged half-cooked.
Move Ready tickets to frontOrders that are ready to pack jump to the front of the packer screen.
Sort by time remainingThe order with the least time left comes first. Priority tickets stay at the front.
Update Customer Display on CompleteA finished order shows as Ready on the customer order status board.
Call waiter when order is doneFor table orders, the screen does the asking for you.

Example set-ups for one, two and three or more screens

KitchenScreensHow it runs
Small takeaway1 screen, as a KDS, above the passEveryone reads the same screen. Item counts tell the grill how much to make. The right start for most takeaways.
Busy delivery kitchen2 screens: a KDS for the cooks, Packer Mode by the bagsHide Until Done means the packer only sees finished orders. A label printer at packing puts one sticker on every item.
Full line3 or more: a Prep Station each for grill and fryer, then Packer ModeScreens linked as an assembly line. Add Batch Cooking for anything you cook ahead, and a bump bar at each prep station.
A starting point, not a rule. We'll tailor printing and bump bars with you on a demo.

The shape of the line follows the menu. A pizza shop splits at make table and oven. A quick service kitchen splits at grill, fryer and pack. A takeaway with one cook should not split at all. For screens and mounting, see the kitchen display screen guide, and for bump bars, what a bump bar is. If you want screens supplied, see Touch2Success's hardware.

Six mistakes to avoid when you split a kitchen

  • Buying screens before you have stations. If one person cooks everything, a second screen gives them a second place to look. Add a screen when a second station has its own cook.
  • Sections that do not match the menu. Routing follows the kitchen sections in your menu set-up. If the wings are filed under grill but cooked in the fryer, they will show on the wrong screen. Fix the menu, not the kitchen.
  • A packer who sees everything at once. Without Hide Until Done, the packer screen fills with orders nobody can pack yet. Turn it on.
  • Nobody on expo. A screen that shows every order only helps if someone is looking at it. Name the person for each shift.
  • A screen nobody can reach. If it is mounted high or hands are greasy, add a bump bar instead of asking cooks to stretch.
  • Setting up every screen from scratch. Save the first Prep Station as a template, and the Setup Wizard on the next screen of that type offers to apply it.

Do you need stations at all?

An expo screen alone works if

  • One or two people cook, and they stand next to each other.
  • The person who cooks is also the person who packs.
  • Everyone can read the screen from where they work.

Add station screens when

  • Grill and fryer are run by different people.
  • Cooks are reading past other people's items to find their own.
  • Orders reach the bags with something missing.
  • The packer keeps asking which orders are finished.

Stations mean each cook reads only their own items, which is one of the fixes in how to bring ticket times down. Measure before and after to see what it does in your kitchen. They also keep working when the internet does not: on Touch2Success KDS every screen keeps syncing with the others over the shop's own network, with bumps, recalls and holds included. The full feature list is on the Touch2Success KDS page.

Questions people ask

What is an expo screen in a kitchen?

+

An expo screen shows every order in full for the expeditor, the person at the pass who checks orders and decides what goes out next. On Touch2Success KDS this is the KDS screen type: a view of all orders, so staff can manage, rush and clear finished orders for service.

What is KDS routing?

+

KDS routing is the rule that sends each item on an order to the screen at the station that cooks it. On Touch2Success KDS, each screen is assigned the kitchen sections it covers, and Only Show My Items hides everything else.

What is the difference between an expo screen and a prep station screen?

+

A prep station screen shows only the items that one station cooks, such as the grill's burgers. An expo screen shows whole orders, so one person can see what is finished, what is late and what can leave the kitchen.

Can the packer see an order only when it is ready to pack?

+

Yes. With Hide Until Done on Touch2Success KDS, the packer screen only shows an order once every station has finished it, so nothing is bagged half-cooked.

How many kitchen screens do I need?

+

Most takeaways run an expo screen above the pass and a screen at each station. A busy delivery kitchen often runs one for the cooks and one in Packer Mode by the bags. A full line uses a prep station screen each for grill and fryer, then a packer screen.

What happens to station screens if the internet drops?

+

On Touch2Success KDS every screen keeps syncing with the others over the shop's own network, with bumps, recalls and holds included. Orders already on the screens stay put, and new online orders arrive again once the connection is back.

Do I have to set up every station screen from scratch?

+

No. On Touch2Success KDS you can save a screen as a template, and the Setup Wizard on the next screen of that type offers to apply it.

Who wrote this

The Touch2Success KDS team

We build and support Touch2Success KDS, the kitchen display system for restaurants and takeaways that take orders with Touch2Success. Everything we say about our own product is on the Touch2Success KDS page. Spotted something out of date? Tell us and we'll fix it.

One ticket, station to station

See your stations on screen.

Book a demo and we'll show you Touch2Success KDS running on your own menu, with your own orders.

Book a demo