Foodhub for Business is now Touch2Success.

touch2success

How to reduce kitchen ticket times: a practical guide for restaurants and takeaways

To reduce kitchen ticket times, measure them first, then remove the waiting between the cooking. Cook the oldest order first, cook identical items together, give each station only its own work, keep pre-orders off the screen until they are due, and fix packing and handover. Look for minutes lost to reading, counting and looking for things, as well as to cooking.

By the Touch2Success KDS team · Published · 10 min read

Key points

  • A ticket time runs from the order reaching the kitchen to the kitchen marking it done. Agree when to bump, or the number means something different to every cook.
  • There is no single good ticket time. Set a target for each order type on your own menu, then watch how often you hit it.
  • Cooking is not the only slow step. Look at the minutes before the food goes on and after it comes off too.
  • A remake is the longest ticket you will ever have. Getting modifiers right first time is a speed fix, and getting allergies right matters for far more than speed.

Written by the Touch2Success KDS team. We make a kitchen display system, so read this as a vendor's view. Where we describe other products, we say where the information came from.

What a ticket time is, and where the clock starts and stops

A ticket time is the number of minutes between an order reaching the kitchen and the kitchen marking it complete. On paper, that is the printed time on the slip against the clock on the wall. On a kitchen display system, the timer starts as the order lands on the screen and stops when the ticket is bumped.

It is not the same as the customer's wait. Delivery time, the queue at the counter and the driver who has not arrived all sit outside it. That is useful. The ticket time is the part the kitchen controls.

What is a good ticket time?

You will find averages quoted all over the internet. We are not going to repeat one, because a single figure cannot be right for a takeaway and a sit-down restaurant at once. A kebab wrap, a stone-baked pizza and a table of six are three different jobs.

The useful number is your own. Decide how long each kind of order should take on your menu, then measure how often you manage it. On Touch2Success KDS you set how many minutes each order type has before it counts as a priority, separately for Delivery, Pick Up, InStore and Restaurant orders, so a collection that is being waited for at the counter does not get the same allowance as a delivery.

What to watchWhat it tells you
Ticket time by order typeWhether delivery, collection and dine-in orders each leave inside the time you set for them.
The oldest open ticketHow bad the worst wait is right now. One red ticket matters more than a good average.
Orders finished on timeHow much of the shift went to plan. On Touch2Success KDS, Kitchen Score is a live measure of how much food leaves on time, shown with prep on time and completion rate.
RemakesOrders cooked twice. Each one costs you a second ticket time and the food.

There is more on choosing and reading these numbers in kitchen KPIs worth tracking.

Find the slow step before you change anything

Stand at the pass for twenty minutes of a busy service and follow three orders from arrival to bag. Time goes in five places, and only one of them is cooking.

Where the time goesWhat it looks likeWhat usually fixes it
Noticing the orderA tablet beeps under a pile of bags. A ticket prints and curls behind the others.One queue for every channel, and a new order sound loud enough for your kitchen.
Deciding what to cook nextCooks reading the whole rail to find the oldest ticket.Timers and colour on every ticket, sorted by time remaining.
CookingThe fryer is full. The oven only holds four pizzas.Cooking identical items together, and cooking ahead where the food allows it.
Waiting for another stationBurgers ready, chips not started.Station screens, so each cook sees only their part of the order.
Packing and handoverA finished order sits while someone works out which bag it belongs in.A packer screen that shows finished orders first, and a label on every item.

Cook the oldest order first

It sounds obvious. On a full rail it is hard, because the oldest ticket looks exactly like the newest one. The cook has to read the printed time on each slip and do the sum, in the middle of a rush.

A screen does the sum. On Touch2Success KDS a ticket's header starts green, turns yellow when the order is running late and red when it is late, so the whole kitchen knows what to cook first without reading a word. You can also sort tickets by time remaining, which puts the order with the least time left at the front and keeps Priority tickets ahead of it.

Two smaller things help here. Choose a new order sound that carries over the extraction fan, and set how many times it repeats. And when something cannot be cooked yet, hold the ticket so it is clearly set aside, instead of leaving it in the queue.

Cook the same item together, and give each station only its own work

If five cheeseburgers are open across four orders, the grill should cook five cheeseburgers, not one order at a time. The problem on paper is knowing that there are five. On Touch2Success KDS a running count of every item across open orders sits on the screen, and tapping a count lights that item up on each ticket it is on. The detail is in all-day counts and batch cooking.

The second fix is to stop cooks reading work that is not theirs. A prep station screen shows the grill only the grill's items, and a ticket can move from one station to the next as it is bumped. If more than one person cooks in your kitchen, read kitchen stations, expo and routing before you buy a second screen.

Keep pre-orders off the screen until it is time

A 7pm collection placed at lunchtime does two kinds of damage if it sits in the queue all afternoon. Someone cooks it early and it goes out cold, or everyone learns to skip past it and it gets forgotten at 6.50pm.

On Touch2Success KDS a pre-order carries a fire time and appears when it is time to start cooking, not hours before. You choose when that is: at the start of the day, at the start of prep time, one to three hours before, or a time you set.

Fix packing and handover

Food that is cooked but not bagged is still a late order. In delivery-heavy kitchens the pass is often where the minutes go, and it is often a cheap place to win them back.

  • Show the packer finished orders only. With Hide Until Done, the packer screen only shows an order once every station has finished it.
  • Put ready orders first. Move Ready tickets to front does what it says.
  • Label every item. A sticker with the order number, the item and its modifiers ends the guessing about which box goes in which bag. Touch2Success KDS works with Zebra label printers. More in label printing for takeaway orders.
  • Know who is collecting. The delivery partner's logo is on the ticket, along with the order type and whether it is paid, so the handover does not start with a question.

If your delivery orders still arrive on a row of tablets, that is its own delay, and it comes before any of this. See how every channel reaches one Touch2Success KDS screen.

Stop remakes: the longest ticket time of all

An order cooked twice has a ticket time of two orders, and it pushes back everything behind it. Many remakes start with a modifier nobody saw: the no onions, the sauce on the side, the allergy note in small print.

  • Make modifiers impossible to miss. On Touch2Success KDS you set a colour for any keyword. To begin with, words like no and spicy are red, less is yellow, extra is green and on side is grey.
  • Flag allergies on the ticket. An Allergy or Priority flag adds a red border and a strip. There is a full guide to allergen orders on a kitchen display.
  • Keep notes with the dish. Item notes show right under the dish they belong to, not at the bottom of the ticket.
  • Bring back a ticket bumped too soon. Recall returns it to the screen, so the fix is a tap, not a search through the bin.

Review after the shift, for five minutes

Speed sticks when someone looks at it every day. You do not need a report. You need three questions while the kitchen is being cleaned down.

  1. When did tickets go red? A time of day points at staffing or prep. A dish points at the menu.
  2. Which station was everyone waiting for? That is where the next change goes.
  3. What did we remake, and why? Write the reason down. The same few tend to come up.

None of this needs a screen. A whiteboard and a stopwatch will get you a long way. What a KDS changes is that the timing, the colours and the counts happen without anyone doing them, on every order, including the ones at 8pm on a Friday. To see how that looks on your own menu, book a demo from the Touch2Success KDS page, or read why kitchens move off paper tickets.

Questions people ask

What is a ticket time in a kitchen?

+

A ticket time is the number of minutes between an order reaching the kitchen and the kitchen marking it complete. On a kitchen display system the timer starts as the order lands on the screen and stops when the ticket is bumped.

What is the average ticket time for a restaurant?

+

There is no single reliable figure, because it depends on the menu and the type of order. A wrap, a pizza and a table of six take different times. Set a target for each order type on your own menu and measure how often you hit it.

How do I reduce ticket times without hiring more staff?

+

Remove the waiting between the cooking. Cook the oldest order first, cook identical items together, show each station only its own items, keep pre-orders out of the queue until they are due, and make packing faster with a packer screen and item labels.

Does a kitchen display system reduce ticket times?

+

A screen cannot cook faster. It removes time spent reading tickets, counting items and looking for the oldest order, and it shows late orders in colour. How much that saves depends on where your kitchen loses time today, so measure before and after.

When should a cook bump a ticket?

+

Pick one rule for the whole kitchen, such as bumping when the bag is sealed. If some cooks bump when food comes off the grill and others when it leaves, your ticket times cannot be compared.

How do I know which orders are late?

+

On Touch2Success KDS the ticket tells you. Its header starts green, turns yellow when the order is running late and red when it is late. You can also sort tickets by time remaining.

Who wrote this

The Touch2Success KDS team

We build and support Touch2Success KDS, the kitchen display system for restaurants and takeaways that take orders with Touch2Success. Everything we say about our own product is on the Touch2Success KDS page. Spotted something out of date? Tell us and we'll fix it.

Faster tickets start here

See what's running late, live.

Book a demo and we'll show you Touch2Success KDS running on your own menu, with your own orders.

Book a demo