Foodhub for Business is now Touch2Success.

touch2success

Kitchen KPIs: the six numbers worth tracking, and how to measure them

The kitchen KPIs worth tracking are ticket time, on-time rate, completion rate, remakes, late orders by hour and items per order. Together they tell you how fast food leaves, how often it leaves on time, how often it has to be cooked twice and when the kitchen is under most pressure. Start with two, measure them the same way every week, and act on one change at a time.

By the Touch2Success KDS team · Published · 10 min read

Key points

  • Six numbers cover most kitchens: ticket time, on-time rate, completion rate, remakes, late orders by hour and items per order.
  • Define the start and the stop before you measure anything. A ticket time means nothing unless everyone agrees when the clock starts and what ends it.
  • A bump is a record of a tap. It shows when staff marked the order done, not when the food reached the customer.
  • Use the numbers to fix the kitchen, not to rank the cooks. The moment speed is used against people, they bump early and the numbers stop being true.

Written by the Touch2Success KDS team. We make a kitchen display system, so read this as a vendor's view. Where we describe other products, we say where the information came from.

Why measure a kitchen at all

Every owner has a feel for a good service and a bad one. The trouble with feel is that it remembers the worst ten minutes of the night and forgets the rest. A few plain numbers, measured the same way each week, tell you whether last Friday was a one-off or the third bad Friday in a row.

You do not need a dashboard with thirty charts. You need a handful of numbers you understand well enough to argue about. If you run on paper tickets you can still track some of them with a pen and a tally sheet. A kitchen display system makes it easier, because every order already carries a start time and a finish time.

The six numbers, at a glance

KPIWhat it tells youHow to measure it
Ticket timeHow long an order takes from reaching the kitchen to being marked done.Time completed minus time received, per order. Use the middle value for the shift, not the average.
On-time rateHow often you hit your own target.Orders completed inside the target, divided by all orders completed.
Completion rateHow many of the orders you received were finished in the period.Orders completed divided by orders received.
RemakesHow often food is cooked twice, and why.A tally by reason, per shift.
Late orders by hourWhen the kitchen falls behind.Count the orders that missed the target in each hour of service.
Items per orderHow heavy each ticket is.Items sold divided by orders, per shift.
Pick two to start with. Ticket time and remakes are a good pair.

Ticket time: agree the start and the stop

Ticket time is the number everyone quotes and almost nobody defines. Before you compare this week with last week, write down three things.

  1. When the clock starts. The usual choice is the moment the order reaches the kitchen. For a pre-order, start it at the time the order is due to be cooked, not the time the customer placed it. On Touch2Success KDS a pre-order appears at its fire time, not hours early.
  2. What stops it. On a screen, that is the bump: the moment the order is completed. On paper, it is whatever you agree, such as the ticket going on the spike.
  3. Which orders count. Leave out test orders and orders that were cancelled. Decide what to do with orders left open at closing, and do the same thing every week.

Then split it. A delivery order with a driver waiting and a table of six are different jobs, and one blended number hides both. Track ticket time by order type at the very least. If you want to bring the number down once you can see it, read how to reduce kitchen ticket times.

On-time rate: the number customers feel

Customers do not experience your average. They experience whether their own order was on time. On-time rate is the share of orders finished inside a target you set.

Set the target per order type, and set it honestly. A target you hit every time teaches you nothing. On Touch2Success KDS each screen has a number of minutes for Delivery, Pick Up, InStore and Restaurant orders before an order counts as a priority, and the ticket header turns yellow when an order is running late and red when it is late. Ask on a demo how those minutes relate to the late colours, so your review target and the screen agree.

Remakes: the cost you can't see on a timer

A fast kitchen that regularly cooks orders twice is not a fast kitchen. Remakes cost food, time and often a refund, and they push every order behind them back. A timer will not count them for you, because a remake is a decision made at the pass. Keep a tally sheet by the pass for a fortnight, with the reason for each one.

Reason for the remakeWhere to look
Missed modifierHow changes show on the ticket. Colour highlights on modifiers help.
Wrong item in the bagPacking. Item labels and a packer check against the ticket.
Missing itemWhether every station had finished before the order was bagged.
Cooked too early, gone coldTiming between stations, and pre-orders started too soon.
Allergy or dietary mistakeYour allergen routine. See allergy orders in a busy kitchen.
Dropped, burnt or spoiledUsually pressure. Check it against late orders by hour.

Late orders by hour, and items per order

These two explain the others. Late orders by hour shows when the kitchen falls behind. If nearly all your late orders sit in one hour, you do not have a slow kitchen. You have a staffing, prep or menu problem in that hour, and it is far cheaper to fix one hour than a whole week.

Items per order tells you how heavy the tickets were. A shift with the same number of orders but bigger baskets will have longer ticket times, and that is not the cooks slowing down. Read ticket time next to items per order before you draw a conclusion.

While service is running, the live version of this is the item count. Touch2Success KDS keeps a running count of every item across open orders, so the grill knows there are five cheeseburgers to cook, not just the one on the ticket in front of it. There is more on that in batch cooking and all-day counts.

What a kitchen screen shows you live

Many kitchen display systems report something about speed. What they call it, and how deep it goes, varies. On Touch2Success KDS there are three live figures.

  • Kitchen Score. A live measure of how much food leaves on time, across every order, as the shift happens.
  • Prep on time. Shown alongside the Kitchen Score.
  • Completion rate. Also live, alongside the other two.

Our pages describe these three live figures but not how each is calculated, so do not assume they match the definitions in the table above. For the other numbers, time a sample by hand or ask on a demo what can be exported. These are for the shift you are in. They let the person on the pass see the kitchen slipping while there is still time to move someone onto the fryer. For running several sites the same way, see Touch2Success KDS for enterprise.

Other systems describe their reporting differently. When we checked each vendor's own public pages on 17 November 2026, Toast described kitchen productivity reporting, Lightspeed a KDS Statistics report with prep times and a heatmap, Square prep-time insights, and Fresh KDS kitchen and item analytics. If reporting matters to you, ask to see the actual report on a demo. The side-by-side is on our compare page.

What a bump does and doesn't prove

Every speed number from a kitchen screen rests on one event: someone marking the order done. That is an app event. It shows when staff tapped the ticket or pressed the bump bar. It does not show when the food was ready, when it was bagged or when the driver took it.

  • A cook who bumps as the food goes in the box and a cook who bumps when the bag is sealed will show different ticket times for the same work.
  • A kitchen that bumps early to clear the screen will look fast and send out late food.
  • A ticket that was bumped by mistake and recalled may be counted in a way you do not expect. Ask your supplier how recalls are treated.

The fix is a house rule, not a setting. Decide what bumping means in your kitchen, such as the bag is sealed and on the shelf, and train it. Then your numbers mean the same thing on every shift. It belongs in your go-live training.

A fifteen-minute weekly review

Numbers only help if someone looks at them on a schedule. This takes a quarter of an hour, once a week, with whoever runs the kitchen.

  1. 1

    Write down the same numbers for the same shifts

    Pick your two or three busiest services. Note the on-time figures at the same point in each one, such as the end of service, plus the remake tally.

  2. 2

    Compare like with like

    This Friday against last Friday, not Friday against Tuesday. Note anything unusual: a promotion, a staff absence, a delivery partner outage.

  3. 3

    Find the one worst thing

    The hour with the most late orders, or the most common remake reason. One thing, not five.

  4. 4

    Change one thing

    Move a prep task earlier, add a person for one hour, add a highlight colour for a modifier that keeps being missed, or change where the packer stands.

  5. 5

    Check it next week

    Give a change two or three weeks before you keep or undo it. One week's move is a lead, not proof.

Three mistakes to avoid

  • Ranking cooks by speed. The first time a number is used against someone, the team learns to bump early. You lose the truth and gain nothing.
  • Chasing someone else's benchmark. A pizza shop and a full-service restaurant should not have the same ticket time. Your own number last month is the comparison that matters.
  • Measuring everything. Six numbers is the ceiling, not the starting point. Two that you act on beat six that you file.

The numbers to watch are different when there is no dining room. A KDS for dark kitchens covers packing and handover for delivery-only units.

Questions people ask

What are the most important kitchen KPIs?

+

Ticket time, on-time rate, completion rate, remakes, late orders by hour and items per order. If you only track two, start with ticket time and remakes, because one measures speed and the other measures what speed is costing you.

How do you calculate ticket time?

+

Take the time the order was completed and subtract the time it reached the kitchen. Do it per order, then use the middle value for the shift so a single very slow order does not distort the result. Measure it separately for each order type.

What is a good ticket time?

+

There is no single figure that applies to every kitchen. A pizza shop, a burger takeaway and a table-service restaurant cook different food in different ways. Set a target for each order type that you can hit most of the time, then compare yourself with your own previous weeks.

What is the Kitchen Score on Touch2Success KDS?

+

It is a live measure of how much food leaves on time, across every order, as the shift happens. It sits alongside prep on time and completion rate.

Does a bump mean the food was handed over?

+

No. A bump records the moment staff marked the order done on the screen or the bump bar. It does not record when the food was bagged, collected or delivered. Agree what bumping means in your kitchen so the numbers stay consistent.

Can I track kitchen KPIs without a kitchen display system?

+

Some of them. You can tally remakes and late orders on paper, and time a sample of tickets by hand. Ticket time and on-time rate for every order are much easier with a kitchen display system, because each order already has a start and a finish time.

Should I use kitchen KPIs to assess individual cooks?

+

It is rarely a good idea. Speed numbers depend on the menu, the station and the orders that happened to arrive. Using them against individuals encourages early bumping, which makes the numbers wrong. Use them to find problems in the process.

Who wrote this

The Touch2Success KDS team

We build and support Touch2Success KDS, the kitchen display system for restaurants and takeaways that take orders with Touch2Success. Everything we say about our own product is on the Touch2Success KDS page. Spotted something out of date? Tell us and we'll fix it.

Your numbers, live

Watch your Kitchen Score.

Book a demo and we'll show you Touch2Success KDS running on your own menu, with your own orders.

Book a demo