Foodhub for Business is now Touch2Success.

touch2success

Kitchen label printing for takeaway orders: a sticker for every item

Kitchen label printing means a label printer in the kitchen prints one sticker for every item in an order, showing the order number, the item and its modifiers. The sticker goes on the box, so the packer can match every box to the right bag. It is aimed squarely at mixed-up takeaway bags.

By the Touch2Success KDS team · Published · 10 min read

Key points

  • One sticker per item, not one per order. Each box carries its own order number, so a lid does not have to be lifted to find out what is inside.
  • Choose when it prints. As the order arrives, as each item is finished, or when the whole order is done. The right choice depends on when you box the food.
  • Labels and receipts do different jobs. The label identifies a box. The receipt lists the whole order for the bag.
  • An order label is not an allergen label. It shows what the customer asked for, not what is in the dish.

Written by the Touch2Success KDS team. We make a kitchen display system, so read this as a vendor's view. Where we describe other products, we say where the information came from.

Why takeaway bags get mixed up

Picture the packing bench at eight on a Friday. Six orders are open. There are eleven identical white boxes on the bench, four of them cheeseburgers, and one of those cheeseburgers has no onions. The packer has a paper ticket in one hand and is lifting lids with the other.

That is one place orders go wrong. Not at the grill, where the cook read the ticket correctly, but at the bench, when a closed box has lost its connection to the order it belongs to. The customer who asked for no onions gets onions. A bag leaves one side short. A driver takes the wrong bag.

A label tackles the problem at the point it starts. If every box is stickered the moment the food goes in, nothing on the bench is anonymous.

What an item label is

An item label is a small sticker printed by a label printer in the kitchen, one for each item in an order. On Touch2Success KDS, every sticker carries the order number, the item and its modifiers. It can also carry a count, such as 1 of 3.

The 1 of 3 matters more than it looks. A packer holding stickers 1 and 2 of 3 knows a box is missing before the bag is sealed, without counting anything against a ticket.

What goes on a label

A label is small, so it should carry only what the next person needs. On Touch2Success KDS three things are always there, and you choose the rest.

On the labelWhy it is usefulOn Touch2Success KDS
Order numberMatches the box to the bag and the bag to the customer.Always
ItemSays what is in the box without opening it.Always
ModifiersTells the No Onions burger from the others.Always
Order typeDelivery, collection or table, so the box goes to the right place.Your choice
Item countShows where the label sits in the order, such as 1 of 3.Your choice
Customer nameHandy at a busy collection counter.Your choice
Delivery addressHelps the driver handover.Your choice
Order noteCarries the customer's note through to packing.Your choice
Thank you messageA friendly line the customer sees.Your choice

Touch2Success KDS has four label styles. You can make items bold, put modifiers on a new line, add a divider and change the item text size, so the label can be read at arm's length by someone moving fast.

When to print: on receive, per item or on complete

The same label is useful or useless depending on when it comes out of the printer. Think about the moment the food goes into its box, and print just before that.

PrintWhat happensSuits kitchens that
On receiveThe full set of labels prints the moment the order lands.Label the packaging before they cook, such as lining up boxes for a pizza order.
Per itemEach label prints as its item is ticked off.Box each item as it comes off the grill or out of the fryer. The sticker is in your hand as the food is.
On completeLabels print when the order is bumped.Plate or tray the food first and box it all at the end.

You can also choose which order types print at all. Touch2Success KDS lets you pick from table ordering, delivery, pickup or collection and in-store, so a dine-in order does not waste a delivery label.

Labels vs receipts: do you need both?

They are different tools. A receipt printer prints one slip for the whole order. A label printer prints one sticker for each item. Many kitchens run both.

ReceiptItem label
What it printsOne slip listing the whole order.One sticker per item.
Where it goesOn or in the bag.On each box, cup or wrap.
What it is forThe final check, and the customer's record.Telling closed boxes apart.
PrinterA receipt printer, on a paper roll.A label printer, on a roll of stickers.
Worth it whenAlmost always, if food leaves the building.Orders have several boxed items, or modifiers are common.

As a rough guide, a small takeaway where one person cooks and packs can manage with a receipt on the bag. A busy delivery kitchen with a separate packer gets the most from a label printer at the packing bench. If you are still deciding whether to keep paper in the kitchen at all, see KDS vs kitchen printer.

Which label printers work

Label printing depends on the kitchen display software as much as the printer, so check both. Touch2Success KDS prints labels on Zebra label printers.

  • Connection. USB, Wi-Fi or LAN, or Bluetooth. The KDS searches all three at once when you add a printer.
  • Label sizes. From 2.2 by 1 inch up to 4.1 by 5.9 inches, with 2.2 by 1.5 inch and 2.25 by 2 inch in between.
  • Label types. Gap, black mark or continuous labels, direct thermal or ribbon.
  • Size detection. A Zebra printer can measure the label for you with Detect Label Size.
  • Roll changes. The printer handles roll changes on its own and stops printing when it is out of labels, so a label is not sent into thin air.

Other systems handle labels differently, and at least one puts it on a higher plan. When we checked vendors' public pages on 17 November 2026, Fresh KDS listed label printing on its Premium plan, and Toast documented item labels for its own KDS. For Square, Lightspeed and Epos Now we could not find item label printing documented, which is not the same as saying they lack it. The comparison pages show the detail and the sources.

Reprints, dropped printers and empty rolls

Labels get dropped in the fryer. Rolls run out mid-rush. A labelling set-up is only as good as its recovery.

  • Reprint one label. On Touch2Success KDS, double-tap an item to print its label again.
  • Reprint the order. Tap the ticket header and press Print, or press the print key on a bump bar.
  • Nothing lost while a printer reconnects. With print job tracking on, every print is saved before it is sent. If a printer drops off, jobs wait, and you can retry or reprint from Print Jobs.
  • Out of labels. Load a new roll. A label that could not print is not sent, so reprint it once the roll is in.

What a label can't do: allergens and the law

An order label tells the packer and the customer which item is in the box and what was changed. It does not list what the dish contains. A sticker that says Chicken Curry, No Nuts records a request. It is not allergen information for that dish, and it should not be treated as one.

This matters for takeaways, because the rules for delivery are specific. The Food Standards Agency's allergen guidance for food businesses, which applies in England, Wales and Northern Ireland, says that for food sold at a distance, "allergen information must be provided at two stages in the order process": "before the purchase of the food is completed" and "when the food is delivered". The same guidance says "Takeaway meals should be labelled clearly so customers know which dishes are suitable for those with an allergy."

An item label does not do that. It identifies the box and records what the customer asked for. It does not replace your allergen information, your menu matrix or a conversation with the customer. Read the guidance, and speak to your local authority's food safety team if you are unsure what applies to you. How allergy orders are flagged on the kitchen screen itself is covered in handling allergen orders on a kitchen display.

Setting up label printing

On Touch2Success KDS, labels are set up from Settings, under Printers & Sections.

  1. 1

    Connect the printer and load labels

    Plug it into the screen by USB, put it on the same network as the screen, or pair it over Bluetooth.

  2. 2

    Add it

    Tap Add new printer, pick your printer from the list of found printers and choose Label printer. Give it a name the team will recognise.

  3. 3

    Match the label size

    Set the size, or let the printer measure it with Detect Label Size.

  4. 4

    Design the label

    Tap Edit label, choose one of the four styles and tick the order details you want on it.

  5. 5

    Choose when it prints

    On receive, per item or on complete, and for which order types.

  6. 6

    Test it

    Run a test print, then put a real order through before service and stick the labels on real boxes.

The wider install, from mounting screens to the first test order, is in how to set up a kitchen display system. Ask us which printers suit your set-up. Touch2Success's screens are on the hardware page.

Do you need item labels at all?

You can probably skip labels if

  • Most orders are one or two items.
  • The person who cooks also packs, and remembers what is in each box.
  • Your packaging already shows what is inside, such as a clear lid.

Labels earn their place when

  • Orders have several boxed items that look the same when closed.
  • A separate person packs what others have cooked.
  • Modifiers are common, and getting one wrong means a remake or a refund.
  • Drivers or customers regularly query what is in the bag.

Labels are part of how Touch2Success KDS is used in takeaways and pizza shops, where the packing bench is the last check before the food leaves.

Labels matter most where there is no counter at all. See a kitchen display for dark kitchens for how packing works in a delivery-only unit.

Questions people ask

What is a kitchen label printer?

+

A kitchen label printer prints small stickers for food orders, usually one per item. Each sticker shows the order number, the item and its modifiers, and goes on the box so the packer can match it to the right bag.

What should be on a takeaway order label?

+

At least the order number, the item and any modifiers. On Touch2Success KDS you can add the order type, item count, customer name, delivery address, order note and a thank you message.

When should item labels print?

+

Just before the food goes into its box. Touch2Success KDS can print labels when the order arrives, as each item is ticked off, or when the order is completed. Kitchens that box each item as it is cooked usually print per item.

Which label printers does Touch2Success KDS work with?

+

Zebra label printers, connected over USB, Wi-Fi or LAN, or Bluetooth. Label sizes run from 2.2 by 1 inch to 4.1 by 5.9 inches, on gap, black mark or continuous labels, direct thermal or ribbon.

Can I reprint a label if one is lost?

+

Yes. On Touch2Success KDS, double-tap an item to reprint its label, or press Print from the ticket header or the bump bar to print the order again.

Is an order label the same as an allergen label?

+

No. An order label shows which item is in the box and what the customer changed. It does not list the allergens in the dish. Food Standards Agency guidance for England, Wales and Northern Ireland says allergen information for distance selling must be provided before the purchase is completed and when the food is delivered.

Do I need a label printer and a receipt printer?

+

Not always. A receipt on the bag is enough for many small takeaways. A label printer is worth adding when orders have several boxed items, modifiers are common, or a separate person packs the food.

Sources

  1. GOV.UK: Allergen guidance for food businesses. Last updated 17 July 2026. Read 17 November 2026
  2. Fresh KDS: pricing. Label printing by plan, checked 17 November 2026
  3. Toast: How to set up print item labels. Checked 17 November 2026

Who wrote this

The Touch2Success KDS team

We build and support Touch2Success KDS, the kitchen display system for restaurants and takeaways that take orders with Touch2Success. Everything we say about our own product is on the Touch2Success KDS page. Spotted something out of date? Tell us and we'll fix it.

A label for every item

Stop bags getting mixed up.

Book a demo and we'll show you Touch2Success KDS running on your own menu, with your own orders.

Book a demo