Key points
- Plan on paper first. Decide how many screens you need and what each one shows before anything goes on a wall.
- One network for everything. Screens, network printers and the till should all join the shop's own network. Use a cable where you can.
- Set up your first screen fully, then copy it. On Touch2Success KDS you can save a finished screen as a template for the next one.
- Never go live cold. Put test orders through and let every cook bump, hold and recall one before the first real ticket arrives.
Written by the Touch2Success KDS team. We make a kitchen display system, so read this as a vendor's view. Where we describe other products, we say where the information came from.
Before you start: what you need
Setting up an app-based KDS such as Touch2Success KDS is closer to hanging a TV and signing in to an app than to an IT project. Most of the time goes on decisions, not on technology. Have these ready and the rest is quick.
- A screen for each station you are equipping. Check it runs your software. Touch2Success KDS needs Android 7.0 or later, on a touchscreen or a TV screen.
- A way to mount it, plus power and, ideally, a network socket nearby.
- The shop's Wi-Fi or network details.
- Your sign-in details. For Touch2Success KDS that is the mobile number registered with your takeaway, with the phone to hand.
- Any printers and bump bars you plan to use, with paper or labels loaded.
- A quiet hour. Do this between services, not during one.
The steps below use Touch2Success KDS as the worked example, because that is the system we build. The order of work is the same for any kitchen display system: plan, mount, connect, configure, test.
Step 1: Plan what each screen is for
An easy mistake is buying screens first and deciding their job later. Do it the other way round. Sketch your kitchen and mark where an order is cooked, where it is packed and where it is handed over. Each of those points is a candidate for a screen. Start small. You can add screens as you grow.
| Kitchen | Screens | Printing | Bump bars |
|---|---|---|---|
| Small takeaway | 1 screen above the pass, as a KDS | One receipt printer for the bag | Optional |
| Busy delivery kitchen | 2 screens: a KDS for the cooks, Packer Mode by the bags | A label printer at packing, one sticker per item | One for the cooks |
| Full line | 3 or more: a Prep Station each for grill and fryer, then Packer Mode | Labels at packing, a receipt printer at the pass | One per prep station |
If you are not sure, give the pass a screen showing every order and each station a screen showing its own items. You can change a screen's job later without starting again. For how tickets move between screens once you have more than one, read kitchen stations, expo and routing.
Step 2: Mount the screens and connect the network
Mount each screen where its cook can read it without turning round, out of the splash zone, and away from direct heat and steam. If it is a touchscreen, it has to be within comfortable reach. If it is a wall TV, plan a bump bar at hand height.
Then the network. Wi-Fi or a cable both work, and a cable is steadier next to a hot, busy kitchen. The rule that matters more is this: put your kitchen screens, your network printers and the till on the same network in the shop. That is how the KDS finds printers and how the screens keep each other in step, including when the internet drops.
Step 3: Sign in and connect your store
Open Touch2Success KDS on the screen. You only do this once per screen. If the app is not on your screen yet, ask us how it is installed.
- 1
Enter your mobile number
On the Sign in screen, pick your country and enter the mobile number registered with your takeaway, then tap Continue.
- 2
Enter the code
A one-time PIN is sent to that number. Type it in. If nothing arrives, use Resend SMS or Get OTP on call.
- 3
Choose your store
If your number is linked to more than one store, pick the one this screen belongs to.
No phone to hand? The sign-in screen also shows an activation code. Give that code to the Touch2Success team and the screen signs itself in once it is activated.
Step 4: Follow the set-up steps
A new Touch2Success KDS screen opens its Setup Wizard on its own. It has up to seven steps. Tap Next to move on, or skip the rest and leave everything at the defaults. Anything you choose can be changed later in Settings.
- 1
Choose the language
English, Spanish, French, Albanian, Chinese or Turkish. It changes straight away.
- 2
Pick the screen type
KDS shows all orders. Prep Station shows only the items assigned to that station. Packer Mode brings the items from every prep station together into one package. Batch Cooking is for cooking in batches instead of ticket by ticket.
- 3
Use a template, if there is one
If your store already has a screen of this type set up, the wizard offers to match it. Say yes and the new screen gets the same settings, with fewer questions to answer.
- 4
Name the station
Something the team will recognise, such as Grill, Pizza or Packing. The name shows in Settings and on your other screens.
- 5
Choose what this station sees
Pick the order types it shows: Delivery, Collection, In-Store and Restaurant. All four are on to begin with. Then choose the kitchen sections it covers, or leave it on all sections.
- 6
Decide how much each ticket shows
Simple gives the cooks the order number, order type, time in, priority and allergies. Standard, which suits most kitchens, adds the customer name, delivery partner, address and delivery notes. Custom lets you pick each detail yourself.
- 7
Connect a printer, or skip it
Find and pair a printer now, or choose Not now and add it later. Then open the KDS. The screen is live.
Step 5: Add printers and a bump bar
Both are optional. Add a printer if food leaves with paper, and a bump bar where hands are wet, gloved or greasy.
- Printers. Switch the printer on and connect it by USB, on the same network as the screen, or over Bluetooth. Tap Add new printer and Touch2Success KDS searches all three at once and lists what it finds. Say what kind it is, name it, and run a test print. If a network printer is not found, you can add it by its IP address.
- When to print. Choose whether a printer prints when an order arrives, when an item is done or when the order is done, and which order types it prints for.
- Labels. A label printer prints one sticker per item. The full walk-through is in label printing for takeaway orders.
- Bump bar. Plug it in over USB, pick the layout that matches the sticker printed on your bar, and press each key to check it.
Step 6: Run test orders before service
This is the step people skip. Put an order through before service and let the team try each action once. It takes a couple of minutes.
- Read the colour. A ticket's header starts green. It turns yellow when the order is running late and red when it is late.
- Tick off an item. Tap an item when it is done.
- Complete the order. Double-tap the ticket header, or press bump on the bump bar.
- Open the actions. Tap the ticket header for Hold, Note, Priority, Allergy, Print and Complete, and to move the ticket forward or back.
- Bring one back. Bumped too soon? Recall it straight away, or find it under Completed and tap Recall.
- Check the paper. If a printer is connected, make sure the receipt or labels came out when you expected.
If you run more than one screen, send a test order with something for every station and watch it travel. With Hide Until Done switched on, the packer screen should only show the order once every station has finished it. A plan for bringing the whole team along is in training kitchen staff for a KDS go-live.
Step 7: Tune the settings to your kitchen
Start with the defaults. After a shift or two you will know what to change. These are the main settings to look at on Touch2Success KDS.
| Setting | What you can change |
|---|---|
| Layout and text size | Rail, Flow or Split, in Light or Dark, with Small, Medium or Large text. Quick Settings changes all of them from the kitchen screen. |
| Sounds | The new order sound, how many times it repeats, a priority order sound and the volume. |
| Modifier highlights | A colour for any keyword. To begin with, words like no and spicy are red, less is yellow, extra is green and on side is grey. |
| What a ticket shows | Each detail on or off: order number, order type, time in, partner logo, customer name, payment status and more. |
| Pre-orders | When a pre-order appears: at the start of the day, at the start of prep time, one to three hours before, or a time you set. |
| Settings PIN and templates | Ask for a PIN before anyone can open Settings, and save the screen as a template for the next one. |
Go-live checklist
Run through this on the afternoon you switch over.
- Every screen is mounted, powered and showing the KDS full screen.
- Screens, network printers and the till are on the same shop network.
- Each screen has the right type and name, and shows the right order types and sections.
- A test order has reached every screen it should, and none it should not.
- Printers have paper or labels loaded and have passed a test print.
- Bump bar keys do what their stickers say.
- Every cook on shift has bumped, held and recalled a test order.
- The new order sound is loud enough to hear over the extraction.
- The Settings PIN is on.
- You have decided whether to keep a printer running alongside for the first week.
On that last point: keeping a paper back-up for a few days is a reasonable comfort, and Touch2Success KDS can print a ticket when an order arrives if you want it to. What moving off paper looks like is on from paper tickets to kitchen screens.
Screens to buy are on the Touch2Success hardware page, the channels that feed the screen are on the integrations page, and if you are planning several sites at once, the enterprise team can plan the rollout with you.
Questions people ask
How long does it take to set up a kitchen display system?
+
It depends on the system and how many screens you have. Most of the time goes on mounting the screens and deciding what each one shows. On Touch2Success KDS a Setup Wizard walks you through each screen step by step, and a finished screen can be saved as a template for the next.
Do I need an engineer to install a KDS?
+
Not usually for the software. On Touch2Success KDS you sign in with your registered mobile number and follow the Setup Wizard, with no technical knowledge needed. You may want someone to mount screens and run cables safely.
What do I need before I set up a KDS?
+
A screen for each station that runs your KDS software, a way to mount it, power, the shop's network, your sign-in details, and any printers or bump bars you plan to use. For Touch2Success KDS the screen needs Android 7.0 or later.
Should kitchen screens use Wi-Fi or a cable?
+
Either works. A cable is steadier next to a hot, busy kitchen. What matters most is that screens, network printers and the till are all on the same network in the shop.
Do I have to set up every screen from scratch?
+
On Touch2Success KDS, no. Save a finished screen as a template, and the Setup Wizard on the next screen of that type offers to apply it.
Can I change the set-up after going live?
+
Yes. On Touch2Success KDS everything chosen in the Setup Wizard can be changed later in Settings, including the screen type, the order types it shows and how much each ticket shows. Layout and sounds are in Settings too.
Should I keep my kitchen printer when I install a KDS?
+
Many kitchens keep one printer for the receipt or label that leaves with the food, and some run paper alongside the screen for the first few days as a back-up. Touch2Success KDS can print when an order arrives, when an item is done or when the order is done.
Who wrote this
The Touch2Success KDS team
We build and support Touch2Success KDS, the kitchen display system for restaurants and takeaways that take orders with Touch2Success. Everything we say about our own product is on the Touch2Success KDS page. Spotted something out of date? Tell us and we'll fix it.

Sam
Tom
Leo
Mia