Key points
- Reach decides the type. If a cook can touch the screen comfortably, use a touchscreen. If it sits high on a wall, use a TV screen and a bump bar.
- Size it by reading distance, not by the box. Stand where the cook stands and read the smallest line on a ticket. If you can't, go bigger or bring it closer.
- Check what the software runs on before you buy a screen. Some systems need the vendor's own hardware. Touch2Success KDS runs on Android 7.0 or later.
- A screen for each job. One above the pass for the full order, one per station for its own items, and one by the bags if you pack.
Written by the Touch2Success KDS team. We make a kitchen display system, so read this as a vendor's view. Where we describe other products, we say where the information came from.
What counts as a kitchen display screen
KDS screen, KDS monitor, kitchen order screen and TV for kitchen orders all mean the same thing: the physical display that shows your order tickets. The screen on its own does nothing. It needs kitchen display software, and that software decides which screens you are allowed to use.
This is the first thing to check, because it can save you buying twice. Some systems only run on hardware the vendor sells. Toast KDS, for example, runs on Toast's own Android tablets, according to Toast's public pages when we checked on 17 November 2026 (the sources are listed on Touch2Success KDS vs Toast KDS). Others are apps you install on a screen you choose. Touch2Success KDS is an Android app for Android 7.0 or later, and it runs on touchscreens and on TV screens. You can see what it does on the Touch2Success KDS page.
- TouchscreenAt the station. Tap and double-tap.
- TV screenOn the wall. Android TV or a Fire TV Stick.
- With a bump barOut of reach, or wet and greasy hands.
Touchscreen or TV screen?
The honest answer is that it depends on whether a hand can reach the screen. A cook has to tell the system when food is done. They either touch the screen, or they press a key on a bump bar mounted where their hands already are.
| Touchscreen at the station | TV screen on the wall | |
|---|---|---|
| Best for | A station where the cook stands within arm's reach of the screen. | A screen several people read from a distance, or one mounted above head height. |
| How cooks mark food done | Tap an item when it is done. Double-tap a ticket to complete it. | With a USB bump bar. No touch needed. |
| What it runs on, for Touch2Success KDS | An Android touchscreen on Android 7.0 or later. | Android TV, or an Amazon Fire TV Stick plugged into the TV. |
| Watch out for | Greasy or gloved fingers. A bump bar solves this too. | It needs the bump bar, so budget for one per screen. |
You do not have to choose one for the whole kitchen. Touch2Success KDS takes touch, a USB bump bar, or both on the same screen. A common mix is a touchscreen by the bags for the packer and a wall screen with a bump bar over the grill. There is more on the Android side of this in the Android kitchen display system guide.
How big should a kitchen display screen be?
Big enough to read, and no bigger than the wall allows. Screen size in inches tells you less than you would think, because what matters is how large the text ends up and how far away the reader stands.
Use this test before you fix anything to a wall. Put the screen where you plan to mount it, open a busy-looking board, and stand where the cook will stand during service. Now read the smallest thing on a ticket, which is usually a modifier such as No Onions or a note under a dish. If you have to lean in, the screen is too small, too far away, or the text is set too small.
- Text size is adjustable. On Touch2Success KDS you choose Small, Medium or Large text, so try the larger sizes before you buy a larger screen.
- Bigger text means fewer tickets on screen. A small screen with large text may only show a few orders at once. If you regularly have many orders open, that is the reason to size up.
- The layout matters as much as the glass. Touch2Success KDS has Rail, Flow and Split layouts, in light or dark mode. Quick Settings shows a live preview of each one, so you can pick what suits that screen from the kitchen floor.
- One reader or several? A station screen read by one cook at arm's length can be small. A screen above the pass that the whole line glances at needs to be larger.
Where to mount it, and which way up
Mount the screen where eyes already go. In most kitchens that is above the pass, or directly in front of the station the screen serves. A cook should be able to look up from the grill, read, and look back down without turning round.
- In the line of sight. Roughly eye level for a touchscreen. Higher is fine for a wall screen with a bump bar, as long as nobody has to crane their neck.
- Within reach, if it is touch. If a cook has to stretch over a hot surface to tap it, it is in the wrong place or it needs a bump bar.
- Out of the splash zone. Not directly over the fryer, the steamer or the sink.
- Away from glare. A screen facing a window or under a bright strip light washes out. Check it at the time of day you are busiest.
- Near power and, ideally, a network socket. Plan the cable run before you drill.
- Where the new order sound can be heard. The screen needs a speaker for the new order sound, and Touch2Success KDS sets the volume from the KDS itself.
Landscape or portrait? Either. Touch2Success KDS adapts its layout to both, so let the wall decide. Landscape suits a wide space above the pass. Portrait suits a narrow pillar between two stations. While the KDS is open the display stays awake and full screen. Check the TV's own sleep or eco timer is off too.
Heat, grease and steam
A kitchen is a hard place for electronics. A screen bought for a living room will work in one, but how long it lasts depends on where you put it and how you treat it. This is general advice, not a Touch2Success requirement.
- Keep it out of direct heat. Above the pass is usually cooler than above the grill. If the wall feels hot to your hand during service, pick another wall.
- Keep steam off it. Steam finds its way into vents and ports. To one side of the steamer is better than directly over it.
- Make it wipeable. Grease settles on everything. A flat screen with few gaps is easier to wipe down at close than one with a deep bezel.
- Ask the supplier two questions. What temperature range is the screen built for, and does it have an ingress protection (IP) rating, which describes how well it keeps out dust and water? A commercial screen is more likely to have clear answers than a household TV.
- Stop people touching it. The less a screen is prodded with wet or greasy fingers, the longer it stays readable. That is one reason kitchens add a bump bar.
Cable or Wi-Fi?
Either works. A cable is steadier next to a hot, busy kitchen, where metal surfaces and microwave ovens do Wi-Fi no favours. If a network socket is within reach of the mount, use it.
Whichever you choose, put your kitchen screens, your network printers and the till on the same network in the shop. That is how the KDS finds printers, and how the screens keep each other in step. It is also what lets them carry on when the internet drops: on Touch2Success KDS, orders already on the screens stay put and every screen keeps syncing with the others over the shop's own network. The detail is in what happens to a KDS when the internet goes down.
How many screens do you need?
Fewer than you might expect. Start with the smallest set-up that solves your problem, and add screens when a station is clearly waiting on information. This is the starting point we give kitchens for Touch2Success KDS.
| Kitchen | Screens | Printing | Bump bars |
|---|---|---|---|
| Small takeaway | 1 screen above the pass, as a KDS | One receipt printer for the bag | Optional |
| Busy delivery kitchen | 2 screens: a KDS for the cooks, Packer Mode by the bags | A label printer at packing, one sticker per item | One for the cooks |
| Full line | 3 or more: a Prep Station each for grill and fryer, then Packer Mode | Labels at packing, a receipt printer at the pass | One per prep station |
What each of those screen types does, and how a ticket moves between them, is covered in kitchen stations, expo and routing. If you run a single-station kitchen where one person cooks and packs, you may not need a screen at all, and a printer may be enough. For how Touch2Success KDS is used in takeaways, see Touch2Success KDS for takeaways.
Buy new, or use a screen you already have?
If your software lets you choose the hardware, a screen you already own may do the job. Check it against this list first.
- It runs the operating system your KDS needs. For Touch2Success KDS that is Android 7.0 or later, Android TV or an Amazon Fire TV Stick.
- It can stay on for a whole shift without overheating or going to sleep.
- It has a speaker, or can be connected to one, loud enough for your kitchen.
- It can be mounted securely where you need it.
- It has a USB port if you plan to plug in a bump bar or a USB printer.
Buying from scratch? Touch2Success sells kitchen screens too. What is available depends on your country, so ask us and we will match it to your kitchen. You can see the wider range on the Touch2Success hardware page. For what your set-up would cost, ask for a quote.
For a small counter, see the kitchen display system for cafés. For the hardware side of an Android set-up, read Android kitchen display systems.
Questions people ask
Can I use a normal TV as a kitchen display screen?
+
It depends on the software. Touch2Success KDS runs on TV screens with Android TV, or on a TV with an Amazon Fire TV Stick plugged in. Tell us the stick's model before you buy and we'll confirm it. A TV has no touch, so pair it with a USB bump bar. Household TVs are not built for heat, grease and steam, so mount it away from the cooking line.
What size screen do I need for a KDS?
+
There is no single right size. Size it by reading distance: stand where the cook stands and check you can read the smallest text on a ticket. A station screen read at arm's length can be small. A screen above the pass that several people read needs to be larger.
Is a touchscreen or a bump bar better in a kitchen?
+
A touchscreen is simplest where the cook can reach it with clean hands. A bump bar is better where hands are wet, gloved or greasy, or where the screen is mounted out of reach. Touch2Success KDS works with touch, a USB bump bar, or both on the same screen.
Can a kitchen display screen be mounted in portrait?
+
On Touch2Success KDS, yes. The screen works in landscape or portrait and the layout adapts to either, so you can fit it to the wall space you have.
Does a kitchen display screen need Wi-Fi?
+
It needs a network, which can be Wi-Fi or a cable. A cable is steadier in a hot, busy kitchen. Screens, network printers and the till should all be on the same network in the shop.
What does Touch2Success KDS run on?
+
Touch2Success KDS is an Android app for Android 7.0 or later. It runs on Android touchscreens and on TV screens using Android TV or an Amazon Fire TV Stick, in landscape or portrait.
How many kitchen display screens does a takeaway need?
+
Most takeaways run a screen above the pass and one at each station. A busy delivery kitchen adds a screen for packing, and a full line gives each prep station its own screen.
Who wrote this
The Touch2Success KDS team
We build and support Touch2Success KDS, the kitchen display system for restaurants and takeaways that take orders with Touch2Success. Everything we say about our own product is on the Touch2Success KDS page. Spotted something out of date? Tell us and we'll fix it.




